Kontron COMe Starterkit Eval T2 Manual de usuario Pagina 124

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 218
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 123
COM Express Interfaces
2.19.2. Routing Considerations
The SMBus should be connected to all or none of the PCIe/PCI devices and slots. A general
recommendation is to not connect these devices to the SMBus.
The maximum load of SMBus lines is limited to 3 external devices. Please contact your Module
vendor if more devices are required.
Do not connect Non-Suspend powered devices to the SMBus unless a bus switch is used to
prevent back feeding of voltage from the Suspend rail to other supplies.
Contact your Module vendor for a list of SMBus addresses used on the Module. Do not use the
same address for Carrier located devices.
PICMG
®
COM Express
®
Carrier Board Design Guide Rev. 2.0 / December 6, 2013
124/218
Vista de pagina 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 217 218

Comentarios a estos manuales

Sin comentarios