Kontron AT890X Full-Size CLI Manual de usuario descargar pdf (Pagina 90)

Switching Commands AT8901/2/3

AT8901/2/3 CLI Reference Manual Page 2 - 56

Mbr Ports A listing of the ports that are members of this port-channel (LAG), in

unit/slot/port notation. There can be a maximum of eight ports

assigned to a given port-channel (LAG).

Port Speed Speed of the port-channel port.

Type This field displays the status designating whether a particular port-

channel (LAG) is statically or dynamically maintained.

Static - The port-channel is statically maintained.

Dynamic - The port-channel is dynamically maintained.

Active Ports This field lists ports that are actively participating in the port-channel

(LAG).

2.13 Port Mirroring

Port mirroring, which is also known as port monitoring, selects network traffic that you

can analyze with a network analyzer, such as a SwitchProbe device or other Remote

Monitoring (RMON) probe.

2.13.1 monitor session

This command configures a probe port and a monitored port for monitor session (port

monitoring). Use the

source interface <unit/slot/port> parameter to specify the

interface to monitor. Use

rx to monitor only ingress packets, or use tx to monitor only

egress packets. If you do not specify an

{rx | tx} option, the destination port

monitors both ingress and egress packets. Use the

destination interface <unit/slot/

port

> to specify the interface to receive the monitored traffic. Use the mode parameter

to enabled the administrative mode of the session. If enabled, the probe port monitors

all the traffic received and transmitted on the physical monitored port.

Format

monitor session <session-id> {source interface <unit/

slot/port> [{rx | tx}] | destination interface <unit/slot/

port> | mode}

Mode Global Config

2.13.1.1 no monitor session

Use this command without optional parameters to remove the monitor session (port

monitoring) designation from the source probe port, the destination monitored port and

all VLANs. Once the port is removed from the VLAN, you must manually add the port

to any desired VLANs. Use the

source interface <unit/slot/port> parameter or

destination interface <unit/slot/port> to remove the specified interface from the

port monitoring session. Use the

mode parameter to disable the administrative mode of

the session.

NOTE: Since the current version of FASTPATH only supports one session, if

you do not supply optional parameters, the behavior of this command

is similar to the behavior of the

no monitor command.

Format

no monitor session <session-id> [{source interface <unit/

slot/port> | destination interface <unit/slot/port> |

mode}]

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 303 304

Comentarios a estos manuales

Sin comentarios

Kontron AT890X Full-Size CLI Manual de usuario Pagina 90

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Kontron AT890X Full-Size CLI