Kontron AT890X Full-Size CLI Manual de usuario Pagina 100

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 304
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 99
Switching Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 66
2.16.3 port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed
on a specific port.
Default 20
Format
port-security max-static <maxvalue>
Mode Interface Config
2.16.3.1 no port-security max-static
This command resets the maximum of statically locked MAC addresses allowed on a
specific port to its default value.
Format
no port-security max-static
Mode Interface Config
2.16.4 port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The
<vid> is the VLAN ID.
Format
port-security mac-address <mac-address> <vid>
Mode Interface Config
2.16.4.1 no port-security mac-address
This command removes a MAC address from the list of statically locked MAC
addresses.
Format
no port-security mac-address <mac-address> <vid>
Mode Interface Config
2.16.5 port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked
addresses.
Format
port-security mac-address move
Mode Interface Config
2.16.6 show port-security
This command displays the port-security settings. If you do not use a parameter, the
command displays the settings for the entire system. Use the optional parameters to
display the settings on a specific interface or on all interfaces.
Format
show port-security [{<unit/slot/port> | all}]
Mode Privileged EXEC
Admin Mode Port Locking mode for the entire system. This field displays if you do
not supply any parameters.
For each interface, or for the interface you specify, the following information appears:
Vista de pagina 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 303 304

Comentarios a estos manuales

Sin comentarios