Kontron AT890X Full-Size CLI Manual de usuario descargar pdf (Pagina 203)

AT8901/2/3 Utility Commands

Page 5 - 5 AT8901/2/3 CLI Reference Manual

5.3.2 set board ipmi-controller debug

This command enables temporary IPMI controller serial debug output on the

management serial console. .

Format

set board ipmi-controller debug {on | off}

Mode Privileged EXEC

NOTE: Use this command with care as it may render the console useless until a full

board reset is executed

5.3.3 set board fcap

This command enables or disables some firmware capabilities. If the handle capability

is enabled, the hardware handle is ignored.

Format

set board fcap handle enable

set board fcap handle disable

Mode Privileged EXEC

5.3.4 set board routing

This commands sets which interface should be configured with layer 3 functionality.

This becomes effective after the next reboot. You should use for this reboot the factory

defaults for the configuration to avoid inconsistency (layer 3 commands may be

implemented in the current configuration for the fabric interface which reboots without

layer 3 functionality).

Format

set board routing base

set board routing extension

set board routing none

Mode Privileged EXEC

NOTE: The “set board routing extension” command is only available on a

AT8902

5.3.5 atca port override

This command overrides the current ekeying status. The user specified port status

(enable/disable) is set if not set already by e-keying. The status is marked as user

specified. Supported interfaces can be seen in Table 7.1. “Interface mapping” on page

5 - 5

Format

atca port override {enable | disable} <I/F> <channel>

<port>

Mode Global Config

Table 7.1. Interface mapping

I/F Description Channel Port

base base interface ethernet 1-16 0

update AT8901/2/3 update channel ethernet 1 0

shmc PICMG 3.0 Shelf manager cross connect 1-20 0

extension extension fabric interface ethernet 1-15 0-1

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 303 304

Comentarios a estos manuales

Sin comentarios

Kontron AT890X Full-Size CLI Manual de usuario Pagina 203

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Kontron AT890X Full-Size CLI