Kontron AT890X Full-Size CLI Manual de usuario descargar pdf (Pagina 278)

Management Commands AT8901/2/3

AT8901/2/3 CLI Reference Manual Page 6 - 36

6.12.2 set watchdog

This command configures the watchdog. It sets the timeout for different watchdog

(during BIST, during loading of kernel and INITRD, during startup of switching

application and during normal execution of switching application) and the heartbeat

(sending interval and number of missed heartbeats before failure occurance). All

values (except missed heartbeats) are in seconds, a value “0” means that the related

watchdog is disabled. The default value is disabled.

Format

set watchdog bist <0,60-6000>

set watchdog osloader <0,120-6000>

set watchdog init <0,120-6000>

set watchdog application <0,120-6000>

set watchdog heartbeat <0,1-6000>

set watchdog heartbeat-failure <0,3-100>

Mode Privileged EXEC

6.13 ASI commands

The following commands are only applicable on AT8903 boards

6.13.1 show asi register

This command dumps the merlin (ASI switch) register file in hex dwords, starting from

offset and reading count dwords. The offset can be specified in standard C notation.

Format

show asi register <offset> <count>

Mode Privileged EXEC

6.13.2 asi register write

This command writes one dword datum in the merlin register file at the specified

offset. The offset, datum and mask can be specified either as decimal, hex or octal in

standard C notation (i.e. 0x123, 0700, 88). If a mask is given, the current register is

read in first and only the bits set in the mask are replaced with the corresponding bits

from the datum dword.

Format

asi register write <offset> <datum> [<mask>]

Mode Privileged EXEC

6.13.3 download asi srom

This command downloads an ASI image from URL and flashes the SROM with the

new image.

Format

download asi srom <url>

Mode Privileged EXEC

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 303 304

Sin comentarios

Kontron AT890X Full-Size CLI Manual de usuario Pagina 278