Kontron AT890X Full-Size CLI Manual de usuario descargar pdf (Pagina 231)

AT8901/2/3 Utility Commands

Page 5 - 33 AT8901/2/3 CLI Reference Manual

5.9.1.1 no ip dhcp pool

This command removes the DHCP address pool. The name should be previously

configured pool name.

Format

no ip dhcp pool <name>

Mode Global Config

5.9.2 client-identifier

This command specifies the unique identifier for a DHCP client. Unique-identifier is a

valid notation in hexadecimal format. In some systems, such as Microsoft DHCP

clients, the client identifier is required instead of hardware addresses. The unique-

identifier is a concatenation of the media type and the MAC address. For example, the

Microsoft client identifier for Ethernet address c819.2488.f177 is 01c8.1924.88f1.77

where 01 represents the Ethernet media type. For more information, refer to the

“Address Resolution Protocol Parameters” section of RFC 1700, Assigned Numbers

for a list of media type codes.

Default none

Format

client-identifier <uniqueidentifier>

Mode DHCP Pool Config

5.9.2.1 no client-identifier

This command deletes the client identifier.

Format

no client-identifier

Mode DHCP Pool Config

5.9.3 client-name

This command specifies the name for a DHCP client. Name is a string consisting of

standard ASCII characters.

Default none

Format

client-name <name>

Mode DHCP Pool Config

5.9.3.1 no client-name

This command removes the client name.

Format

no client-name

Mode DHCP Pool Config

5.9.4 default-router

This command specifies the default router list for a DHCP client. {address1,

address2… address8} are valid IP addresses, each made up of four decimal bytes

ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Default none

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 303 304

Comentarios a estos manuales

Sin comentarios

Kontron AT890X Full-Size CLI Manual de usuario Pagina 231

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Kontron AT890X Full-Size CLI