Kontron AT8404 CLI Manual de usuario descargar pdf (Pagina 284)

Management Commands AT8404

AT8404 CLI Reference Manual Page 5 - 8

sets the outbound Telnet operational mode as ‘linemode’ where, by default, the operational mode is ‘character

mode’. The noecho option disables local echo.

5.3.3 transport input telnet

This command regulates new Telnet sessions. If enabled, new Telnet sessions can be established until there are

no more sessions available. An established session remains active until the session is ended or an abnormal

network error ends the session.

5.3.3.1 no transport input telnet

Use this command to prevent new Telnet sessions from being established.

5.3.4 transport output telnet

This command regulates new outbound Telnet connections. If enabled, new outbound Telnet sessions can be

established until the system reaches the maximum number of simultaneous outbound Telnet sessions allowed. An

established session remains active until the session is ended or an abnormal network error ends it.

5.3.4.1 no transport output telnet

Use this command to prevent new outbound Telnet connection from being established.

Format telnet <ip-address|hostname> <port> [debug] [line] [noecho]

Modes • Privileged EXEC

• User EXEC

Note: If the Telnet Server Admin Mode is disabled, Telnet sessions cannot be established. Use the ip

telnet server enable command to enable Telnet Server Admin Mode.

Default enabled

Format transport input telnet

Mode Line Config

Format no transport input telnet

Mode Line Config

Default enabled

Format transport output telnet

Mode Line Config

Format no transport output telnet

Mode Line Config

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 372 373

Sin comentarios

Kontron AT8404 CLI Manual de usuario Pagina 284