Kontron AT8404 CLI Manual de usuario descargar pdf (Pagina 254)

Utility Commands AT8404

AT8404 CLI Reference Manual Page 4 - 40

• h-node—Hybrid (recommended)

4.8.13.1 no netbios-node-type

This command removes the NetBIOS node Type.

4.8.14 next-server

This command configures the next server in the boot process of a DHCP client.The <address> parameter is the

IP address of the next server in the boot process, which is typically a TFTP server.

4.8.14.1 no next-server

This command removes the boot server list.

4.8.15 option

The option command configures DHCP Server options. The <code> parameter specifies the DHCP option code

and ranges from 1-254. The <ascii string> parameter specifies an NVT ASCII character string. ASCII character

strings that contain white space must be delimited by quotation marks. The hex <string> parameter specifies

hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a

period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22

0c).

4.8.15.1 no option

This command removes the DHCP Server options. The <code> parameter specifies the DHCP option code.

Default none

Format netbios-node-type <type>

Mode DHCP Pool Config

Format no netbios-node-type

Mode DHCP Pool Config

Default inbound interface helper addresses

Format next-server <address>

Mode DHCP Pool Config

Format no next-server

Mode DHCP Pool Config

Default none

Format option <code> {ascii string | hex <string1> [<string2>...<string8>] | ip

<address1> [<address2>...<address8>]}

Mode DHCP Pool Config

Format no option <code>

Mode DHCP Pool Config

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 372 373

Sin comentarios

Kontron AT8404 CLI Manual de usuario Pagina 254