Kontron AT8404 CLI Manual de usuario descargar pdf (Pagina 250)

Utility Commands AT8404

AT8404 CLI Reference Manual Page 4 - 36

4.8.1.1 no ip dhcp pool

This command removes the DHCP address pool. The name should be previously configured pool name.

4.8.2 client-identifier

This command specifies the unique identifier for a DHCP client. Unique-identifier is a valid notation in hexadecimal

format. In some systems, such as Microsoft DHCP clients, the client identifier is required instead of hardware

addresses. The unique-identifier is a concatenation of the media type and the MAC address. For example, the

Microsoft client identifier for Ethernet address c819.2488.f177 is 01c8.1924.88f1.77 where 01 represents the

Ethernet media type. For more information, refer to the “Address Resolution Protocol Parameters” section of RFC

1700, Assigned Numbers for a list of media type codes.

4.8.2.1 no client-identifier

This command deletes the client identifier.

4.8.3 client-name

This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters.

4.8.3.1 no client-name

This command removes the client name.

4.8.4 default-router

This command specifies the default router list for a DHCP client. {address1, address2… address8} are valid

IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Format no ip dhcp pool <name>

Mode Global Config

Default none

Format client-identifier <uniqueidentifier>

Mode DHCP Pool Config

Format no client-identifier

Mode DHCP Pool Config

Default none

Format client-name <name>

Mode DHCP Pool Config

Format no client-name

Mode DHCP Pool Config

Default none

Format default-router <address1> [<address2>....<address8>]

Mode DHCP Pool Config

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 372 373

Sin comentarios

Kontron AT8404 CLI Manual de usuario Pagina 250