Kontron AT8404 CLI Manual de usuario descargar pdf (Pagina 190)

Quality of Service (QoS) Commands AT8404

AT8404 CLI Reference Manual Page 3 - 16

3.3.18 match srcip6

This command adds to the specified class definition a match condition based on the source IP address of a packet.

3.3.19 match srcl4port

This command adds to the specified class definition a match condition based on the source layer 4 port of a packet

using a single keyword or numeric notation. To specify the match condition as a single keyword notation, the value

for <portkey> is one of the supported port name keywords (listed below). The currently supported <portkey>

values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these translates into its equivalent

port number, which is used as both the start and end of a port range.

To specify the match condition as a numeric value, one layer 4 port number is required. The port number is an

integer from 0 to 65535.

3.3.20 match vlan

This command adds to the specified class definition a match condition based on the value of the layer 2 VLAN

Identifier field (the only tag in a single tagged packet or the first or outer tag of a double VLAN tagged packet). The

VLAN ID is an integer from 1 to 4095.

3.3.21 match secondary-vlan

This command adds to the specified class definition a match condition based on the value of the layer 2 secondary

VLAN Identifier field (the inner 802.1Q tag of a double VLAN tagged packet). The secondary VLAN ID is an integer

from 1 to 4095.

Default none

Format match srcip6 <source-ipv6-prefix/prefix-length>

Mode Ipv6-Class-Map Config

Default none

Format match srcl4port {<portkey> | <0-65535>}

Mode Ipv6-Class-Map Config

Class-Map Config

Note: This command is not available on the Broadcom 5630x platform.

Default none

Format match vlan <1-4095>

Mode Ipv6-Class-Map Config

Class-Map Config

Note: This command is not available on the Broadcom 5630x platform.

Default none

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 372 373

Sin comentarios

Kontron AT8404 CLI Manual de usuario Pagina 190