Kontron NSC2U IP Network Server Manual de usuario descargar pdf (Pagina 56)

NSC2U Server—Optional Component Installations

Kontron IP Network Server NSC2U

Product Guide, rev. 1.4 December 2009

4. Snap the three I/O expansion module standoffs into the server board. (Figure 38,

“A”)

5. Attach the I/O expansion module to the server board connector (“B”) and the

standoffs.

6. If this is the last task you are performing, replace the riser card assembly, the

processor air duct and the top cover of the chassis. Reconnect all the external

devices and plug in the power cord(S).

For information about mounting the server in a rack, see Section 3.5, “Installing

the Server into a Rack” on page 48

Figure 37. Removing the I/O Module Filler Panel

TS000546

Figure 38. Installing an I/O Expansion Module

TS000547

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 151 152

Sin comentarios

Kontron NSC2U IP Network Server Manual de usuario Pagina 56