Kontron NSC2U IP Network Server Manual de usuario descargar pdf (Pagina 60)

NSC2U Server—Optional Component Installations

Kontron IP Network Server NSC2U

Product Guide, rev. 1.4 December 2009

5. Route the end of the GbE cables going to the front panel through the retention clip.

(Figure 43, “A”)

6. Leave the LED ribbon cable out of the retention clip.

Note: Do not fully re-install the riser card assembly in the chassis yet. The connection to the

front panel must be set up first. Put the assembly in position without inserting the riser

cards into the server board slots.

Figure 42. Configuring the LAN Card

TS000319

Figure 43. Routing the GbE Cables through the Retention Clip

TS000321

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 151 152

Sin comentarios

Kontron NSC2U IP Network Server Manual de usuario Pagina 60