Kontron NSW1U IP Network Server Manual de usuario descargar pdf (Pagina 56)

NSW1U Network Server—Optional Component Installation Procedures

Kontron IP Network Server NSW1U

Product Guide, rev. 1.4 December 2009

4.6 Installing the Quad Port Bypass Server Adapter (Copper)

for Front Panel Access

The NSW1U-F and NSW1U-B IP network servers come with a front panel filler panel that has to be

removed and replaced with an escutcheon when installing a GbE LAN card, such as the Intel

PRO/

1000 AT Quad Port Bypass Server Adapter for Copper (NIC in front), for the first time. The chassis

cover and the front bezel must be removed to install or replace the LAN card and to connect the GbE

cables to the escutcheon. In addition, a special LAN card support bracket with a cable opening must

be used, replacing the factory-installed support bracket.

4.6.1 Installing the 4xGbE LAN Card

Note: This section details the instructions for installing the card for copper GbE connectors

only.

Figure 37. Installing the Remote Management Module

GCM3 ModuleRMM Module

TS000414

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 109 110

Sin comentarios

Kontron NSW1U IP Network Server Manual de usuario Pagina 56