Kontron NSW1U IP Network Server Manual de usuario descargar pdf (Pagina 33)

Kontron IP Network Server NSW1U

December 2009 Product Guide, rev. 1.4

Server Installations and Upgrades—NSW1U Network Server

3.3.2.1 DIMM Population Rules

DIMM population rules depend on the operating mode of the memory controller, which is determined

by the number of DIMMs installed. DIMM pairs are populated in the following DIMM slot order: A1 and

B1, A2 and B2, A3 and B3.

DIMMs within a given pair must be identical with respect to size, speed, and organization. However,

DIMM capacities can be different between different DIMM pairs. For example, a valid mixed DIMM

configuration may have 512 Mbyte DIMMs installed in DIMM slots A1 and B1, and 1 Gbyte DIMMs

installed in DIMM slots A2 and B2. Single DIMM operation is supported with the DIMM populated in

slot A1 only, but populating in pairs is recommended.

3.3.2.2 Supported DIMM Configurations

Supported DIMM configurations for this server board are shown in Table 6.

Table 5. Maximum Six-DIMM System Memory Configuration - x4 Dual Rank

DRAM Technology x4 Dual Rank Maximum Capacity

256 Mb 6 GB

512 Mb 12 GB

1024 Mb 24 GB

2048 Mb 48 GB

Table 6. FBDIMM Population Options

Channel 0 Channel 1

Sparing

Possible

DIMM_1A DIMM_1B DIMM_1C DIMM_2A DIMM_2B DIMM_2C

YES

 = Slot is populated.

 = Slot is not populated.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 109 110

Sin comentarios

Kontron NSW1U IP Network Server Manual de usuario Pagina 33