Kontron AT8902M CLI Manual de usuario Pagina 244

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 315
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 243
Utility Commands AT8902M
AT8902M CLI Reference Manual Page 5 - 44
5.10.5 multicast (interface)
This command configures the port based multicast handling. The command defines the
handling for port specific unregistered multicast addresses. The default handling in
FASTPATH is that such packets are flooded (argument ‘default’). The user can change
the behaviour that such packets are dropped (argument ‘none’). The flooding mode is
set per port. It can be applied to either individual physical ports or to a port-channel.
Format
multicast flood default
multicast flood none
Mode Interface Config
5.10.6 show port multicast
This command displays the port based multicast handling. The commands displays for
a specified interface or all interfaces the multicast flooding settings. The displayed
fields are
the interface
the multicast flooding, indicating whether a packet with unregistered multicast
address should be flooded or not (yes/no).
Format
show port multicast <slot/port>
show port multicast all
Mode Privileged Exec
5.10.7 multicast (VLAN)
This command configures the VLAN based multicast handling. The command defines
the handling for VLAN based unregistered multicast addresses. The default handling in
FASTPATH is that such packets are flooded (argument ‘default’). The user can change
the behaviour that such packets are dropped (argument ‘none’). The flooding mode is
set per VLAN, the VLAN ID range is 1-4094. If a created VLAN is deleted again, the
flooding mode is reset to default.
Format
multicast <1-4094> flood default
multicast <1-4094> flood none
Mode VLAN Config
5.10.8 show vlan multicast
This command displays the VLAN based multicast handling. The command displays
for a specified VLAN ID (range is 1-4094) or all created VLANs (inclusive default
VLAN) the multicast flooding settings. The displayed fields are
the VLAN Identifier (VID) associated with each VLAN
the VLAN type (default, static or dynamic)
the multicast flooding, indicating whether a packet with unregistered multicast
address should be flooded or not (yes/no).
Format
show vlan multicast <1-4094>
show vlan multicast all
Mode Privileged Exec
Vista de pagina 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 314 315

Comentarios a estos manuales

Sin comentarios