Kontron COMe-cP2020 Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
www.kontron.com
COMe-P2020 User Guide
38
3 Configuration
3.1 DIP Switch Configuration
The COMe-cP2020 is equipped with one 4-bit DIP switch, SW1, used for board configuration.
Table 3-1: DIP Switch SW1 Configuration
The default position for the above settings is: OFF.
SWITCH SETTING DESCRIPTION
1 OFF Boot from the standard SPI boot flash
ON Boot from the recovery SPI boot flash
2 OFF The SDHC interface is routed to the onboard MicroSD
ON The SDHC interface is routed to the COM Express connectorResaerved
3OFFReserved
ON
4 OFF Uses the SerDes configuration which is defined via the U-Boot “sconf” command
ON The COME-P2020 uses a default SerDes configuration
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 105 106

Comentarios a estos manuales

Sin comentarios