Kontron CG2100 Carrier Grade Server Manual de usuario descargar pdf (Pagina 49)

4.7 Installing a PCI Riser Card

The CG2100 server does not ship with a PCI riser card, just the sheet metal bracket

where the riser card and PCI add-in cards are housed. There are three different PCI

riser card options that all use the same header connection on the T5520 UR server

board:

• 2U PCIe “butterfly” riser (three full-height/full-length PCIe x8 slots and two low-

profile PCIe x4 slots

• 2U PCIe/PCI-X “butterfly” riser (two PCI-X 133 slots, one full-height/full-length

PCIe x8 slot, and two low-profile PCIe x4 slots)

• 2U PCIe passive riser (three full-height/full-length PCIe x8 slots)

In this section, the riser card example is a full-height, full-length riser, as shown

in Figure 41.

Figure 41. Riser Card Assembly with 2U PCIe/PCI-X “Butterfly” Riser

CAUTION: When handling the riser card, observe normal safety and ESD precautions. (See

Appendix A: Safety Information” for more information.

To install the riser card in the sheet metal bracket:

1. Remove the back chassis cover. For instructions, see “Removing the Back Cover” in

Section 3.2.

2. Remove the riser card assembly from the chassis and place it upside-down. For

instructions, see “Removing the Riser Card Assembly“ in Section 3.2.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 109 110

Sin comentarios

Kontron CG2100 Carrier Grade Server Manual de usuario Pagina 49