Kontron AT8402 CLI Manual de usuario Pagina 102
- Pagina / 253
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 70
Mode Global Config
2.17.3.1 no lldp timers
Use this command to return any or all timing parameters for local data transmission on
ports enabled for LLDP to the default values.
Format
no lldp timers [interval] [hold] [reinit]
Mode Global Config
2.17.4 lldp transmit-tlv
Use this command to specify which optional type length values (TLVs) in the 802.1AB
basic management set are transmitted in the LLDPDUs. Use
sys-name to transmit the
system name TLV. To configure the system name, see 5.6.1 “snmp-server“on page 5 -
15. Use
sys-descto transmit the system description TLV. Use sys-cap to transmit the
system capabilities TLV. Use
port-desc to transmit the port description TLV. To
configure the port description, see 2.1.4 “description“on page 2 - 3.
Default no optional TLVs are included
Format
lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
2.17.4.1 no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command
without parameters to remove all optional TLVs from the LLDPDU.
Format
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
2.17.5 lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs.
Format
lldp transmit-mgmt
Mode Interface Config
2.17.5.1 no lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs. Use this command to cancel inclusion of the
management information in LLDPDUs.
Format
no lldp transmit-mgmt
Mode Interface Config
2.17.6 lldp notification
Use this command to enable remote data change notifications.
Default disabled
- AT8402 CLI Reference Manual 1
- AdvancedTCA 1
- Revision History 2
- Disclaimer 2
- Table of Content 3
- Appendix 16
- AT8402 Preface 17
- Preface AT8402 18
- 1.1 Command Syntax 24
- 1.2 Command Conventions 24
- 1.2.1 Common Parameter Values 25
- 1.5 Command Modes 27
- 1.5.2 CLI Error Messages 30
- 1.6 Using CLI Help 31
- 1.7 Accessing the CLI 31
- Switching Commands 33
- 2. Switching Commands 34
- Switching Commands AT8402 100
- AT8402 Switching Commands 101
- Quality of Service Commands 113
- Chapter 1 113
- 3.1.3 classofservice trust 115
- 3.1.4 cos-queue min-bandwidth 115
- 3.3 DiffServ Class Commands 119
- 3.3.1 class-map 120
- 3.3.1.1 no class-map 120
- 3.3.2 class-map rename 120
- 3.3.3 match any 120
- 3.3.4 match class-map 121
- 3.3.4.1 no match class-map 121
- 3.3.5 match dstip 121
- 3.3.6 match dstl4port 121
- 3.3.7 match ip dscp 122
- 3.3.8 match ip precedence 122
- 3.3.9 match ip tos 122
- 3.3.10 match protocol 123
- 3.3.11 match srcip 123
- 3.3.12 match srcl4port 123
- 3.4 DiffServ Policy Commands 124
- 3.4.4 class 125
- 3.4.4.1 no class 125
- 3.4.5 mark cos 125
- 3.4.6 mark ip-dscp 125
- 3.4.7 mark ip-precedence 126
- 3.4.8 police-simple 126
- 3.4.9 policy-map 126
- 3.5 DiffServ Service Commands 127
- 3.6 DiffServ Show Commands 128
- 3.6.2 show diffserv 129
- 3.6.3 show policy-map 129
- 3.6.4 show diffserv service 131
- 3.6.7 show service-policy 132
- 3.7.3 {deny 133
- 3.7.4 mac access-group 134
- 3.7.4.1 no mac access-group 135
- 3.7.5 show mac access-lists 135
- 3.8.1 access-list 136
- 3.8.1.1 no access-list 137
- 3.8.2 ip access-group 137
- 3.8.2.1 no ip access-group 137
- 3.8.3 acl-trapflags 138
- 3.8.3.1 no acl-trapflags 138
- 3.8.4 show ip access-lists 138
- 3.8.5 show access-lists 139
- Utility Commands 141
- 4. Utility Commands 142
- AT8402 Utility Commands 143
- Utility Commands AT8402 144
- Management Commands 191
- 5. Management Commands 192
- AT8402 Management Commands 193
- Management Commands AT8402 194
- Getting Help 231
- A. Getting Help 232
- AT8402 Getting Help 233
- List of Commands 236
- P R E L I M I N A R Y 237
Relacionado con productos y manuales para Hardware Kontron AT8402 CLI
Hardware Kontron AT8404 Manual de usuario
(132 paginas)
(132 paginas)
Hardware Kontron AT8404 CLI Manual de usuario
(373 paginas)
(373 paginas)
Hardware Kontron RTM8050 Manual de usuario
(37 paginas)
(37 paginas)
Hardware Kontron AT8050 Manual de usuario
(165 paginas)
(165 paginas)
Hardware Kontron RTM8242 Manual de usuario
(34 paginas)
(34 paginas)
Hardware Kontron AT8242 Manual de usuario
(109 paginas)
(109 paginas)
Hardware Kontron AT8060 Manual de usuario
(160 paginas)
(160 paginas)
Hardware Kontron RTM806x Manual de usuario
(40 paginas)
(40 paginas)
Hardware Kontron 820152 DC-DC Manual de usuario
(4 paginas)
(4 paginas)
Hardware Kontron 820153 DC-DC Manual de usuario
(9 paginas)
(9 paginas)
Hardware Kontron 820155 DC-DC Manual de usuario
(9 paginas)
(9 paginas)
Hardware Kontron KT965 Series Manual de usuario
(90 paginas)
(90 paginas)
Hardware Kontron KTGM45-mITX Manual de usuario
(101 paginas)
(101 paginas)
Hardware Kontron KTQ45-FLEX Manual de usuario
(92 paginas)
(92 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.892 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales