Kontron COMe-bP5020 Manual de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 71
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
www.kontron.com
33
User Guide
COMe-bP5020
3 Configuration
3.1 DIP Switch Configuration
The COMe-bP5020 is equipped with one 4-bit DIP switch, SW1, for board configuration.
Table 13: DIP Switch SW1 Configuration
The default position for the above settings is: OFF
SWITCH SETTING DESCRIPTION
1 OFF Uses the SerDes configuration which is defined via the U-Boot “sconf” command.
ON The COMe-bP5020 uses a fail-safe SerDes configuration.
With this configuration the SerDes lanes are powered off.
2 OFF Boot from the standard SPI boot flash
ON Boot from the recovery SPI boot flash
3 OFF The SDHC interface is routed to the onboard MicroSD
ON The SDHC interface is routed to the COM Express connector
4OFFReserved
ON
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 70 71

Comentarios a estos manuales

Sin comentarios