Kontron SYMKLOUD MS2900 Web Manual de usuario descargar pdf (Pagina 19)

www.kontron.com

Quick Start Guide

Figure 11: Hub and Processor Node Port Mapping

On both Hub 1 and Hub 2, port 2, labeled ’’2’’ on the hub faceplate, is the 10GbE uplink port. This is the port

that connects to the switch port #2.

On both Hub 1 and Hub 2, port 1, labeled ’’1’’ on the hub faceplate, is for stacking multiple SYMKLOUD

MS2900 systems. This port connects to switch port #1.

If the MS2900 system is equipped with optional rear uplink modules:

- Stacking is performed using port 1 of each uplink module (marked on the faceplate), which is routed

to switch port #1.

- A 10GbE uplink port is available on port 2 of each uplink module (marked on the faceplate) and

routed to switch port #2.

NOTE: In the SMBStaX™ GUI, port #1 is not visible since it is used for stacking.

Chassis slots 7 and 9 have 10GbE pipes to support up to two SYMbalance modules optionally or two additional

provisioning processor nodes:

- Hub 1, port #22 (node 7 fabric 1)

- Hub 2, port #24 (node 9 fabric 2)

All other ports are 1GbE.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Sin comentarios

Kontron SYMKLOUD MS2900 Web Manual de usuario Pagina 19