Kontron SMARC-sA3874i Manual de usuario Pagina 67

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 66
67
www.kontron.com
User’s Guide
5 ULP-COM sA3874i Special Features
5.1 Watchdog Timer
The ULP-COM sA3874i module implements a Watchdog Timer (WDT) based on the TI Cortex A8 implementation
with a 32b counter. The WDT is made available through the standard Linux Watchdog API.
A description of the API is available following the link below:
http://www.kernel.org/doc/Documentation/watchdog/watchdog-api.txt
5.2 PMU GPIO
The PMU on the ULP-COM sA3874i contains a few GPIOs. These GPIOs are used for power management
functionality but can also be used for general purpose I/O. These GPIOs are different from ULP-COM sA3874i
module hardware specification GPIOs.
The table below shows the PMU GPIO usage information details:
TI PMU TPS659110C
ULP-COM sA3874i Edge
finger
Net name
Notes
Pin #
Pin Name
Pin
#
Pin Name
F1
SLEEP
S149
SLEEP#
SLEEP#/PMU_SLEEP
Sleep indication from carrier
board
L3
INT1
PMU_INT1
PMU Interrupt signal
N1
PWRHOLD
Not used
N2
PWRDN
THERM
High Temp warning signal
L6
HDRST
P127
RESET_IN#
RESET_IN#/
SYS_RESET_IN#
Reset input to the PMU
through level translator
E4
PWRON
P128
POWER_BTN#
POWER_BTN
Power button input from
carrier board
H4
NRESPWRON
PMU_NRESPWRON
PMU reset out signal
C7
NRESPWRON2
Not used
L5
GPIO0
EN_V_1V5_DDR3
V_1V5_DDR3 Power regulator
enable signal
Vista de pagina 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 79 80

Comentarios a estos manuales

Sin comentarios