Kontron KTUS15-mITX - 1.1 Basic Manual de usuario descargar pdf (Pagina 26)

KTD-00774-G KTUS15/mITX Page 26 of 84

4.5 Display connector

The Intel ® US15W chipset onboard the KTUS15 boards have:

• SDVO channel for display interface

o SDVO to Analogue / DVI-A (CRT)

o SDVO to Digital / DVI-D

• LVDS Single channel 18/ 24bit interface

Depending on the KTUS15/mITX board configuration (refer to section KTUS15/mITX Board configurations),

the board is either configured for analogue (DVI-A) or digital display (DVI-D) output on the onboard DVI

connector which is of the type DVI-I. In other words, even though onboard DVI connector is a type DVI-I

simultaneous analogue and digital output is not possible on the DVI-I connector and it is not possible to

change configuration from Analogue to Digital output or vice versa.

4.5.1 DVI Connector (DVI-A), Analogue output

The DVI-A connector only support DVI Analog output. For connecting a standard CRT (analogue) monitor to

the DVI-A connector a DVI-CRT adapter can be used (Kontron P/N 822001).

Female socket, front view

Signal Description - DVI Connector:

Signal

Description

Type

Pull Up

Note

1-5

N.C.

DDC Clock

2K2

DDC Data

2K2

ANALOG VSYNC

CRT vertical synchronization output.

9-13

N.C.

+5V

Power for monitor when in standby

PWR

GND

PWR

Hot Plug Detect

17-24

N.C.

ANALOG RED

Analog output carrying the red color signal

/75R

ANALOG GREEN

Analog output carrying the green color signal

/75R

ANALOG BLUE

Analog output carrying the blue color signal

/75R

ANALOG HSYNC

CRT horizontal synchronization output.

ANALOG GND

Ground reference for RED, GREEN, and BLUE

PWR

Note 1: The 5V supply is fused by a 1.1A reset-able fuse

Note 2: DVI digital signals are not supported

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Comentarios a estos manuales

Sin comentarios

Kontron KTUS15-mITX - 1.1 Basic Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Kontron KTUS15-mITX - 1.1 Basic