
KTD-S0057-I Page 6 U-Boot Setup
KTAM3874/pITX Software Guide
Examples:
Brightness: 0 minimal value = 0V
or
Brightness: 255 maximal value = +5V
2.4 Devices Menu
This menu part defines several hardware device settings:
mPCIe port settings
Audio settings
LAN ports settings
SATA settings
CAN port 0 settings
CAN port 1 settings
UART port 5 settings
First GPIO port settings
Second GPIO port settings
2.4.1 mPCI Express
®
Port
The selection is limited to the enable respectively disable feature.
disabled
enabled
2.4.2 Audio Device
The selection is limited to the enable respectively disable feature.
Note:
This setting only concerns the audio codec and not the HDMI
®
audio part.
disabled
enabled
2.4.3 LAN Devices
The selection is limited to the enable respectively disable feature.
Note:
This setting affects both LAN controllers.
disabled
enabled
2.4.4 S-ATA
®
Device
The selection is limited to the enable respectively disable feature.
disabled
enabled
Comentarios a estos manuales