Kontron COMe Eval Carrier T10 Manual de usuario descargar pdf (Pagina 12)

COM Express® Eval Type 10 / Specification

3.5 Environmental Specification

Ambient temperature

» Operating: 0 to +60 °C

» Non-operating: -30 to +85 °C

Humidity

» Operating: 10% to 90% (non condensing)

» Non operating: 5% to 95% (non condensing)

3.6 MTBF

The following MTBF (Mean Time Between Failures) values were calculated using a combination of manufacturer‟s test

data, if the data was available, and a Bellcore calculation for the remaining parts. The Bellcore calculation used is

“Method 1 Case 1”. In that particular method the components are assumed to be operating at a 50 % stress level in a

40° C ambient environment and the system is assumed to have not been burned in. Manufacturer‟s data has been

used wherever possible. The manufacturer‟s data, when used, is specified at 50° C, so in that sense the following

results are slightly conservative. The MTBF values shown below are for a 40° C in an office or telecommunications

environment. Higher temperatures and other environmental stresses (extreme altitude, vibration, salt water

exposure, etc.) lower MTBF values.

» System MTBF: tbd hours

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Sin comentarios

Kontron COMe Eval Carrier T10 Manual de usuario Pagina 12