Kontron AT8402 User Manual Manual de usuario descargar pdf (Pagina 62)

AT8402 Hardware Description

Page 3 - 29 AT8402 User Guide

The following table shows the assignment between connector position and switch port (CLI ID).

The two lower RJ45 connectors of the 4-fold block are unused.

The LEDs are controlled by the CPLD: Link/ Activity (Green) and Speed (Green/Yellow).

3.2.4 SAS/SATA Channels

An external 4x SAS/SATA connector provides access to the AT8402 SAS Expander device.

The connector is a SFF-8470 fixed (receptacle) shielded connector with jack screws.

Table 3-26: GbE Assignment

Switch Port Connector

0/1 GE1

0/2 GE2

Table 3-27: GbE LEDs Signification

Speed LED (Green/Yellow)

GREEN 1000BASE-T

YELLOW 100BASE-TX

OFF 10BASE-T

Status LED (Green)

OFF Link down

ON Link up and no activity

BLINK Link up and activity

Table 3-28: External 4x SAS Connector Pin Assignment

Number

Signal Driven by

G1-G9 Ground -

S1 STOR0_RX+ RTM

S2 STOR0_RX -

S3 STOR1_RX +

S4 STOR1_RX -

S5 STOR2_RX+

S6 STOR2_RX -

S7 STOR3_RX +

S8 STOR3_RX -

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 88 89

Sin comentarios

Kontron AT8402 User Manual Manual de usuario Pagina 62