Kontron COMe-mTT10 Manual de usuario descargar pdf (Pagina 15)

COMe-mTT10 / Product Specification

3.4 Electrical Specification

3.4.1 Supply Voltage

Following supply voltage is specified at the COM Express® connector:

VCC:

4.75 - 14V

Standby:

5V DC +/- 5%

RTC:

2.5V - 3.47V

- 5V Standby voltage is not mandatory for operation.

- Extended Temperature (E1) variants are validated for 12V supply only

3.4.2 Power Supply Rise Time

» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.

» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point

following the ATX specification

3.4.3 Supply Voltage Ripple

» Maximum 100 mV peak to peak 0 – 20 MHz

3.4.4 Power Consumption

The maximum Power Consumption of the different COMe-mTT10 variants is 5.2 - 7.5W (100% CPU load on all cores; 90°C

CPU temperature). Further information with detailed measurements are available in Application Note KEMAP054 available

on EMD Customer Section. Information there is available after registration.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 93 94

Sin comentarios

Kontron COMe-mTT10 Manual de usuario Pagina 15