Kontron CP305 BIOS Manual de usuario descargar pdf (Pagina 102)

OEM Feature CP305 BIOS

Page 92 ID 1035-8356, Rev. 1.0

P R E L I M I N A R Y

Clear Configuration Block

This function is used to clear the previously stored settings in the setup default override config-

uration block. When cleared, the Optimal and Fail-Safe default settings are no longer overrid-

den when used for booting. Clearing the configuration block does not affect the current settings

in use.

Optimal and Fail-Safe default settings: No

Override Structure present

This is a display-only function which indicates whether or not an override structure is available

or valid.

Kontron EEPROM Release Version

This is a display-only function which indicates the Kontron release version of the current over-

ride structure. The setting of this function is only valid if the override structure was provided by

Kontron.

OEM EEPROM Release Version

This is a display-only function which indicates the OEM release version of the current override

structure.

Config. Block Activation Flag

This is a display-only function and is reserved for Kontron internal use.

SETTING DESCRIPTION

No This is the BIOS default setting and is automatically set to “No” after the configuration block

is cleared.

Yes Use this setting to enable clearing of the configuration block during the next boot operation.

SETTING DESCRIPTION

No This setting indicates that the override structure is not present.

Yes This setting indicates that the override structure is present and valid.

INV This setting indicates that the override structure is present, but is was previously invali-

dated by the command “Clear Configuration Block”.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 123 124

Sin comentarios

Kontron CP305 BIOS Manual de usuario Pagina 102