Kontron pITX-SP Manual de usuario descargar pdf (Pagina 16)

KTD-S0002-I Page 11 System Memory

pITX-SP User's Guide

5 System Memory

The pITX-SP uses only 200 pin Small Outline Dual Inline Memory Modules (SODIMMs). One socket is avail-

able for +1.8V unbuffered DDR2-400 / DDR2-533 SDRAM of up to 2 GB.

To reduce the design complexity and minimize power the chipset maintains a fixed relationship to the FSB

ront Side Bus) clock frequency. The relation is described in the following table:

Article Number Variant CPU Clock FSB Allowed Modul

03001-0000-11-0 Plus 1.1 GHz 400 MHz DDR2-400

03001-0000-11-1 Basic 1.1 GHz 400 MHz DDR2-400

03001-0000-11-2 Standard 1.1 GHz 400 MHz DDR2-400

03001-0000-16-0 Plus 1.6 GHz 533 MHz DDR2-533

03001-0000-16-1 Basic 1.6 GHz 533 MHz DDR2-533

03001-0000-16-2 Standard 1.6 GHz 533 MHz DDR2-533

Differing from this overview also DDR2-667 RAM modules can be used with all article numbers. RAM modu-

les above DDR2-667 however shouldn't be used.

The total amount of memory available on the SDRAM module is used for main memory and graphic memory

on the pITX-SP. S

hared Memory Architecture (SMA) manages the sharing of the system memory between

graphic controller and processor. Therefore the full memory size is not available for software applications.

When RAM modules with 16 chips are used special Bios settings might be required (example: SAMSUNG

M47OT2953EZ3-CE6). For additional information and support contacts see chapter Technical Support.

Attention: KONTRON Technology A/S can't guarantee the correct functionality of the pITX-SP when a DDR2-667 or a DDR2-533 (for

article number 03001-0000-11-1/2) RAM module is used.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 66 67

Sin comentarios

Kontron pITX-SP Manual de usuario Pagina 16