Kontron MOPSlcdLX Manual de usuario descargar pdf (Pagina 23)

KTD-S0005-C Page 19 Parallel Port Interface

MOPSlcdLX User's Guide

10 Parallel Port Interface

The MOPSlcdLX incorporates a parallel port that can be set to uni-/bidirectional and supports EPP operating

modes.

10.1 Connector

The parallel port is available through the X15004 connector (26 pins). To have the signals available on a

standard parallel interface connector DSUB25 an adapter cable is required which is offered by KONTRON

(KAB-DSUB25-1, part number 96015-0000-00-0).

Header Pin Signal Name Function DSUB25

1 /STB Strobe 1

2 /AFD Autofeed 14

3 D0 Data 0 2

4 /ERR Error 15

5 D1 Data 1 3

6 /INIT Init 16

7 D2 Data 2 4

8 /SLIN Select in 17

9 D3 Data 3 5

10 GND Ground 18

11 D4 Data 4 6

12 GND Ground 19

13 D5 Data 5 7

14 GND Ground 20

15 D6 Data 6 8

16 GND Ground 21

17 D7 Data 7 9

18 GND Ground 22

19 /ACK Acknowledge 10

20 GND Ground 23

21 /BUSY Busy 11

22 GND Ground 24

23 PE Paper out 12

24 GND Ground 25

25 /SLCT Select out 13

VCC

Power +5V ---

Note: 1) To protect the external power lines of peripheral device make sure that

- the wires have the right diameter to withstand the maximum available current.

- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Sin comentarios

Kontron MOPSlcdLX Manual de usuario Pagina 23