Kontron KTQ45-FLEX Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
KTD-00782-I KTQ45 family Page 13 of 92
I/O Control
Winbond W83627DHG LPC Bus I/O Controller
Peripheral
interfaces
Eight USB 2.0 ports on I/O area
Four USB 2.0 ports on internal pinrows
Two Serial ports (RS232) KTQ45/Flex, Four Serials ports 3x(RS323), 1x(RS485)
(Galvanic isolated) with full duplex support on KTQ45/ATXE
One Parallel port, SPP/EPP/ECP
Five Serial ATA-300 IDE interfaces with RAID 0/1/5/10 support
PS/2 keyboard and mouse ports
LAN
Support
1x 10/100/1000Mbits/s using NIC Intel® Boazman-LM WG82567LM (ETHER1)
(connected to ICH10DO Integrated GbE MAC supporting AMT 5.0)
1x 10/100/1000Mbits/s using NIC Intel® Hartwell 82574L (ETHER2)
PXE netboot supported. Wake On LAN (WOL) supported.
BIOS
Kontron Technology / AMI BIOS (core version)
Support for Advanced Configuration and Power Interface (ACPI 3.0), Plug and Play
o Suspend To Ram
o Suspend To Disk
o Intel Speed Step
Secure CMOS/ OEM Setup Defaults
“Always On” BIOS power setting
RAID Support (RAID modes 0, 1, 5 and 10) (for Linux O/S only RAID 0 and 1)
Expansion
Capabilities
PCI Bus routed to PCI slot(s) (PCI Local Bus Specification Revision 2.3)
o KTQ45/Flex: 2 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant
o KTQ45/ATXE: 4 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant
PCI-Express bus routed to PCI Express slot(s) (PCI Express 2.0)
o KTQ45/Flex and KTQ45/ATXE:
1 slot PCI-Express x16 (PCI Express 2.0)
1 slot PCI-Express x4 (PCI Express 1.1)
SMBus routed to FEATURE, PCI slot, PCI Express
LPC Bus routed to TPM connector
DDC Bus routed to CRT connector
8 x GPIOs (General Purpose I/Os) routed to FEATURE connector
Hardware
Monitor
Subsystem
Smart Fan control system, support Thermal® and Speed® cruise for three onboard
Fan control connectors: FAN_CPU, FAN_SYS and FEATURE
Three thermal inputs: CPU die temperature, System temperature and External
temperature input routed to FEATURE connector. (Precision +/- 3ºC)
Voltage monitoring
Intrusion detect input
SMI violations (BIOS) on HW monitor not supported. Supported by API (Windows).
Operating
Systems
Support
WinXP
WinVista
Linux: Red Hat 5 U2, SuSe 10 SP2 (limitations may apply)
(Continues)
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Comentarios a estos manuales

Sin comentarios