Kontron KTLX800-pITX Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 66
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
KTD-S0022-C Page 18 Graphics Interface
KTLX800/pITX User's Guide
larity Jumper 7.7.3 Backlight Po
For backlight inverting the polarity jumper J1304 must be set.
7.7.4 Connector
The backlight control signals and supply voltage is available through the connector J1602 (7 pins).
Header Pin Signal Name Function
1 N.C. Not connected
2 BKLTADJ Brightness control (0V - +5V)
3 GND Ground
4
VDD
1)
Backlight voltage
5
VDD
1)
Backlight voltage
6 GND Ground
1
7
BKLTON 7 Backlight on/off
Note: 1) To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

Comentarios a estos manuales

Sin comentarios