Kontron KT965 Series Manual de usuario descargar pdf (Pagina 31)

KT965 Family

KTD-00699-S Public User Manual Date: 2010-04-15 Page 31 of 90

4.4 Display Connectors

The KT965 board family provides onboard Analog CRT interface. Addtionally the KT965 boards provides

support for ADD2 cards through the onboard PCI Express x16 connector, with extension capability for

support of DVI, LVDS, VGA, HDMI/UDI, TV-Out, etc.

If a PCI Express x16 Graphics add-in card is used, the onboard Graphics controller (GMA 3000) is disabled.

4.4.1 CRT Connector (CRT)

Note

Pull

U/D

Ioh/Iol

Type

Signal

Type

Ioh/Iol

Pull

U/D

Note

6 GND PWR - -

/75R * A0 RED 1 11 NC - - -

7 GND PWR - -

/75R * A0 GREEN 2 12 DDCDAT IO TBD 2K2

8 GND PWR - -

/75R * A0 BLUE 3 13 HSYNC O TBD

9 5V PWR - - 1

- - - NC 4 14 VSYNC O TBD

10 GND PWR - -

- - PWR GND 5 15 DDCCLK IO TBD 2K2

Note 1: The 5V supply in the CRT connector is fused by a 1.1A reset-able fuse.

Signal Description - CRT Connector:

Signal Description

HSYNC CRT horizontal synchronization output.

VSYNC CRT vertical synchronization output.

DDCCLK Display Data Channel Clock. Used as clock signal to/from monitors with DDC interface.

DDCDAT Display Data Channel Data. Used as data signal to/from monitors with DDC interface.

RED Analog output carrying the red color signal to the CRT. For 75 Ohm cable impedance.

GREEN Analog output carrying the green color signal to the CRT. For 75 Ohm cable impedance.

BLUE Analog output carrying the blue color signal to the CRT. For 75 Ohm cable impedance.

DIG-GND Ground reference for HSYNC and VSYNC.

ANA-GND Ground reference for RED, GREEN, and BLUE.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 89 90

Sin comentarios

Kontron KT965 Series Manual de usuario Pagina 31