Kontron JRexplus-DC Manual de usuario descargar pdf (Pagina 20)

KTD-S0008-F Page 15 Graphics Interface

JRexplus-DC User's Guide

7.3.1 JILI30 Connector

Header Pin Signal Name Function

1 FTX0- First channel data output 0 (negative)

2 FTX0+ First channel data output 0 (positive)

3 FTX1- First channel data output 1 (negative)

4 FTX1+ First channel data output 1 (positive)

5 FTX2- First channel data output 2 (negative)

6 FTX2+ First channel data output 2 (positive)

7 GND Ground

8 FTXC- First channel clock output (negative)

9 FTXC+ First channel clock output (positive)

10 FTX3- First channel data output 3 (negative)

11 FTX3+ First channel data output 3 (positive)

12 STX0- Second channel data output 0 (negative)

13 STX0+ Second channel data output 0 (positive)

14 GND Ground

15 STX1- Second channel data output 1 (negative)

16 STX1+ Second channel data output 1 (positive)

17 GND Ground

18 STX2- Second channel data output 2 (negative)

19 STX2+ Second channel data output 2 (positive)

20 STXC- Second channel clock output (negative)

21 STXC+ Second channel clock output (positive)

22 STX3- Second channel data output 3 (negative)

23 STX3+ Second channel data output 3 (positive)

24 GND Ground

25 SDA I2C data line

26 DATAENA Data enable output

27 SCL I2C clock line

28 - 30

VCC

Power +3.3V or +5V

Note: 1) To protect the external power lines of peripheral devices make sure that

- the wires have the right diameter to withstand the maximum available current.

- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.

Warning: Check jumper J2 (panel power) for correct settings for your panel – not doing so might cause permanent damage

to your panel.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 76 77

Sin comentarios

Kontron JRexplus-DC Manual de usuario Pagina 20